Alligator shears-Crocodile cutting machine series-Metal baler, metal press, metal shredder, waste paper baler-Henan Enhon Machinery Equipment Co., Ltd.

Alligator shearsIntroduce

　　The CNC control system of crocodile scissors adopts the control system of CNC cutting machine developed by itself, with PLC for input and output control. Crocodile scissors using programmable logic controller (PLC), high quality electrical components and sealing components to ensure the reliability of the machine; The friction clutch and brake are driven by compressed air, and the compressed air valve is electrically controlled. Sensitive hydraulic press device; Overload, overload protection device can automatically cut off the power to protect the host; The machine is suitable for cutting round steel, square steel, Angle steel of various materials, and can also shear non-ferrous metals (such as copper, aluminum alloy, etc.); The machine has the advantages of high production efficiency, light weight, good working conditions for operators, low noise and vibration.

Picture display

Advantages and characteristics

　　1 Hydraulic drive, electrical appliances equipped with protective devices, reliable safety performance, easy to operate;

　　2 Different shear force and blade length for choice, can be customized for customers non-standard shear machine;

　　3 The oil seal of the main components is oil seal, which greatly improves the sealing performance of the machine;

　　4. The first use of pressure compensation variable pump, effectively improve the machine shear strength;

　　5 Installation without foot screws, can be equipped with diesel engine for power;

　　6 Optional fast hydraulic system or foot switch, the efficiency is significantly higher than the same industry machine.

Working principle

　　Crocodile shear is composed of shear cylinder, shear knife, slide block pressing knife, lower tool holder, pressing cylinder, etc. When the shear work is running, the hydraulic pump station (power output source) supplies oil to the
pressing cylinder so that the sliding block pressing knife is pushed to the lower tool holder to complete the fixed pressing of the material, and then the hydraulic pump station supplies oil to the shear cylinder to complete the
cutting step. After the shear is completed, the hydraulic pump station completes the return operation under the hydraulic oil reflux drive of the feed shear cylinder and the pressing cylinder.

Technical Parameter

Model	EH-160	EH-200	EH-300
Shear force	160	200	300
System pressure	31.5	31.5	31.5
Gape	280	380	450
Edge length	1000	1000	1200
Shear stock	40*40	65*65	80*80
Output per shift	32-40	64-80	120-160
Shear frequency	12-15	12-16	12-17
Motor power	165	18.5	30
Mode of operation	Manual/automatic	Manual/automatic	Manual/automatic

Alligator shears

Alligator shearsIntroduce

Picture display

Advantages and characteristics

Working principle

Technical Parameter

Related Cases

Case recommendation

Service advantages