Car shell crusher

　　1. The fuselage is reinforced with extra-thick steel plate and diagonal brace to ensure that the equipment can meet the overload operation;

　　2. The lining plate and hammer head are processed by heat treatment to eliminate stress naturally, the chemical composition is more stable, and the service life is increased by more than 30%;

　　3. The press device precompresses the material, expands the feeding range and improves the production efficiency.

　　4. Set the safety door, after the unbreakable material enters the crushing chamber, the operator can open the safety door and discharge it from the body to avoid damaging the crusher.

　　5. Hydraulic cover opening device, save time and labor to replace and repair;

　　6.PLC control system and hydraulic power system, intelligent production save time and labor, equipment operation at a glance.

　　The core principle of the automobile crusher is to use a hammer to hit metal materials. Driven by the high-speed high-torque motor, the hammer head on the rotor of the main engine takes turns to hit the objects to be broken into
the chamber, and tears the objects to be broken into the specifications through the space formed between the liner plate and the hammer head. According to the working condition of the crusher, it can be divided into dry system, wet system and semi-wet system. The dry system mainly refers to the broken material must pass through the air rotation sorting system to separate the metal and non-metal, and the whole system is equipped with a dust removal device. The wet system means that water is sprayed at the same time of crushing, and water is washed at the same time of sorting. The semi-wet system is only sprayed with a small amount of water to prevent dust when it is broken, and there is no
cleaning.